I have a bunch of Gamecraft Middle Eastern buildings in 20mm for Ambush Alley that I haven't really taken the time to assemble. I ordered them cut from foam core and, for me, that was a mistake. The foam core takes more effort to finish because the foam melts so far back that you have to fill all of the cut edges or figure out another way to cover them out. I highly recommend only going the MDF route when ordering from him for those kits that have the foamcore option. Fortunately none of his western buildings have that option and he has quite a variety. One of the whole concepts of building Calamity is taking the opportunity to compare the different manufacturers' buildings and see which ones I like as well as make sure that there is a lot of variety in the buildings. I intend to make Calamity a good sized town so I'm figuring twenty buildings or so by the end of the project.
I ordered two buildings; 28MWEST001, a two story building and 28MWEST006 a single story building. Both are different in style from anything else I have ordered so far. I started off with the single story building.
First off there are no instructions. As everyone knows by now this is a huge pet peeve of mine. I know these buildings are pretty dead simple and I can practically put them together blind folded at this point, however, there are always people new to the hobby that might get something like this and throw up their hands. There is a definitely a build sequence that should be followed. I went over to his blog and couldn't find anything detailing construction on the buildings to help out either. So that's a big 0 out of 5 on the instructions.
Now we have a laser cut kit done with done with cad drawings. Everything fit the way it was suppose to and in the end that's usually what matters the most. The engraved detail is quite nice. I enjoy the modeling aspect quite a bit so sometimes I'm disappointed that something doesn't have more detail than it does. But these kits fit together without any problems so that rates a 5 out of 5.
Like some of the other manufacturers I feel that Gamecraft missed a couple of opportunities and did a couple of things that bug me, none of which are going to affect the quality of your game play or truly be something that people are going to notice and point out as a flaw. They just bother me because they are details that could be done better. The floors for the Gamecraft kits are extras, so if you don't intend to ever have combat or some kind of interaction going on the inside of the building then you don't need them. Since my buildings are intended for skirmish gaming and role-playing I need to be able to get miniatures inside so floors were required. This building uses optional floor C which is just a hunk of MDF (well laser cut hunk of MDF). However, there is no floor engraving. If you are going to use the laser to cut it anyway why wouldn't you go ahead and engrave the floorboards on it? The other thing that bothers me is the side door which is set at exactly ground level. That means there is a mismatch in height between the front door, which is elevated because of the porch, and the side door which is right down at the ground. I definitely feel that the side door should be raised up and maybe a little step added to the kit for it. Otherwise someone is going to take a nasty spill inside some where.
With all that being said the Gamecraft kits are really very good. I enjoyed building them and I think that they fit in really well with the other buildings I have. I really like the window and door treatments, I think these are very well done and really help the buildings stand out. They are very similar in look to the Battle Flag buildings to the point that I don't think you will be able to easily tell the difference between them once they are painted up and on the table. They are a bit smaller than the other manufacturers' kits but I think that will make Calamity look like a "real" town when I'm finished.
As with the other kits I took the time to take some construction photos and here they are:
|How it comes right from the USPS box|
|Good Luck getting it back in the bag after you have done this!|
|Window Frames, Rear Wall|
|Group Clamping Shot|
|Adding the front door|
|Adding the back frame. Supports the roof|
and makes the tabs for the side walls to slot
|Side wall with door. Note door is at ground level!|
|Clamping up the porch|
|More porch action.|
|Gluing up the roof.|
|And the back side. Note large glue seam.|
|Gluing up the walls.|
|Still gluing up the walls. The magnets act|
as clamps to keep it square.
|Front view of the wall assembly.|
|Finished, no front awning yet.|
|Finished, from the rear. The other side wall|
is blank. I really like the vertical planking.
|Finished, with the awning in place. Not|
glued in though as it will make it harder
|Scale shot with Black Scorpion mini. I'm|
going to find some smaller profile bases I
|Scale shot with Black Scorpion and|
Battle Flag minis.
|Scale shot, off the porch just so you can|
see the size difference between Black
Scorpion and Battle Flag
|Gamecraft Miniatures and Aetherworks Buildings|
|Gamecraft Miniatures and Battle Flag|
|Gamecraft Miniatures and Battle Flag|
|Gamecraft Miniatures and Knuckleduster|